Steam generator as an emerging heat source to provide equipment, can be quickly recognized by the market, by virtue of its unique technology, today on the core technology of gas steam generator to do a detailed introduction.

First of all, the most basic technology of the gas steam generator is definitely combustion, the United States P low nitrogen burner with frequency combustion and pressure tracking function, to achieve constant pressure steam output function. Low nitrogen combustion technology, ensure nitrogen emission NOX﹤30mg/m³, greatly improve the gas burnout rate (99.9%), the combustion process is more stable and safer, the temperature distribution in the combustion process is more uniform, there is a very high thermal efficiency, low combustion noise, low NOX emission under any power, low CO emission, the emission index does not change with the increase of the use of years of age, etc., and supports the Environmental protection real-time online monitoring.

Composite superconducting heat pipe technology composite superconducting heat pipe technology refers to the pipeline for the double-layer structure, the outer wall of the heat-absorbing tube for the foreign heat-absorbing tube technology integrally molded finned tubes, this tube for the integrally molded process, not only thickened the thickness of the fins but also increased the heat exchange area while making the absorption of heat more uniform, due to the integrally molded special steel structure of the strength of the advantages of the fatigue of the metal has been greatly reduced, so that the life of the tube is more durable. At the same time, the inner wall of the tube for the superconducting special heat pipe, this material is characterized by the heat transfer coefficient greatly exceeds the thermal conductivity of aluminum and copper, the outer wall of the tube of the special steel heat absorption fast and combustion-resistant, the inner wall of the tube of the heat transfer coefficient and the conduction of scale, the two together as a whole to fully solve the traditional 304, 316 series of tubes of metal or ND steel welded fins of the traditional process technology.

These are just some of the gas steam generator technology, as an early start to do steam generator manufacturers we have a lot of technology.