The use of electrically heated boilers before the inspection work, the operation of the precautions, etc., these are the need to carefully check, especially before the use of the inspection work, once found that there is a problem immediately be resolved, so as not to be in the use of the equipment because of operational errors or failures are not resolved to cause the damage to the equipment, personal safety is at risk. So, here we mainly talk about what to pay attention to before using the boiler. Power supply voltage can not exceed the rated voltage ± 5%. Fuel selection of kerosene, diesel, do not use gasoline and heavy oil; winter temperatures below 0 degrees, 0 # diesel often solidification phenomenon, should not be used, it is recommended that the use of -10 # diesel or kerosene. Electric heating steam boiler must be installed grounding wire. Construction requirements: strong and weak power must be separate lines, such as water level sensors, pressure sensors and other weak power lines and the controller of the strong power control output lines separately. On-site installation, should not be worn in the same PVC pipe, such as parallel rows should be kept more than 200mm apart. It is forbidden to place flammable and explosive items such as gasoline and banana water around the electrically heated boiler. The use of this steam boiler indoor should be installed with electronic leak detection alarm device to prevent accidents.

Here mainly explains six points of attention, I hope to be able to attract your attention. Before using the electric heating boiler, the surrounding environment should also be checked, around the flammable and explosive substances can not be placed, to check the components of the equipment, a part of the aging, serious wear and tear should be replaced immediately.