System Overview :  

     Steam condensate recovery equipment is designed by our scientific researchers based on the principle of steam trap and vapor barrier, combined with a number of patented technologies and devices, from the source of steam supply, piping network distribution, steam equipment and process requirements, terminal output and other aspects of overall consideration. This system outlaws the use of a single piece of equipment equipped with a trap, through the entire recovery piping network design + recovery host + a variety of different auxiliary equipment to form a large system of centralized traps, to complete the entire production line saturated state of multiple different pressures of steam condensate under the common network closed recovery; with the implementation of the project staff's extensive practical experience and technical solutions to subvert has been the process of steam condensate. The history of process steam condensate that cannot be recovered by the same unit at high and low pressures in a common network! Ensure process safety and significantly improve the equipment heat transfer efficiency at the same time, energy saving thoroughly! Widely used by many oil and grease, food, medicine, paper, chemical, rubber, plate building materials and other industries. After running:

◆ There is no water vapor leakage point in the whole production line, the equipment does not hold water, the return water does not interfere, the hydrophobicity is smooth, and the system heat exchange is always in the best condition:

◆ Spent vapor produced in various forms is extracted and processed to be reused in production;

◆ Condensate high temperature closed recovery, own boiler enterprise priority into the boiler steam bag, followed by deaerator, condensate value utilization rate of 100%; outside the source of steam supply enterprises according to the actual working conditions of the steam, heat pump multi-stage flash steam extraction, the maximum degree of savings in steam.

 Steam condensate value reuse 100% + spent steam extraction reuse 100% + equipment heat transfer efficiency 100%

Compared with the single waste heat with water and steam forced into the boiler ladle closed recovery method: process safety, significantly improve the efficiency of the equipment heat transfer; the same production load, saving steam 5% to 10%, energy saving to improve 7% to 12% (equipment does not hold water, steam heat transfer effect is good, and the product steam consumption per unit of time is reduced); save the use of the trap of the long-term replacement and maintenance costs.