1. Heat speed: traditional boilers on, often need to preheat for several minutes, wasting a lot of energy every day, while the steam generator uses DC steam generation technology, so that the tap water flows through the heat exchanger on the instantaneous production of steam. Realize the immediate use, without preheating. Power on 5 seconds that is out of steam, the temperature up to 192 ℃.

    2. Frequency control principle: the principle of frequency conversion technology: over a long period of time, the boiler equipment, the amount of gas is maintained in a fixed state, the application of frequency conversion technology can make the steam generator can be automatically adjusted in accordance with the size of the amount of gas used, you can really do the distribution of demand, so as to achieve the purpose of energy saving.

　 3. Furnace without pot: Conventional boiler water storage up to several thousand kilograms, once the consequences of the explosion is unimaginable, "steam generator" that is, the design of the speed of the steam machine, there is no inner liner "pot", is not a closed container, the entire equipment within the heat exchange piping capacity of about 30 The water capacity of the heat exchange pipeline in the whole equipment is about 30 liters, which is lower than the national container standard, and it is also not airtight.

　 4. Labor-free and inspection-free: traditional boiler use, * must comply with the boiler manufacturer's operating procedures, at least 1-3 boiler workers, but also need to be inspected annually. The introduction of steam generators, these troubles are eliminated, without the need for manned, internal water storage less than 30L, without annual inspection. Safe and convenient.