The use of the boiler before the inspection work, the operation of the precautions and so on, these are all need to carefully check, especially before the use of the inspection work, once found that there is a problem immediately to solve, so as not to be in the use of the equipment because of operational errors or failures are not resolved to cause the damage to the equipment, personal safety is at risk.

So, here we mainly talk about what to pay attention to before using the boiler. Power supply voltage can not exceed the rated voltage ±5%. Fuel selection of kerosene, diesel, do not use gasoline and heavy oil; winter temperatures below 0 degrees, 0 # diesel often solidification phenomenon, should not be used, the proposal is to use -10 # diesel or kerosene. Electrically heated steam boiler must be installed grounding wire.

Boiler construction requirements: strong and weak power must be separate lines, such as water level sensors, pressure sensors and other weak power lines and the controller's strong control output lines separately. On-site installation, should not be worn in the same PVC pipe, such as parallel rows should be kept more than 200mm apart. It is forbidden to place flammable and explosive items such as gasoline and banana water around the boiler. When using this boiler indoor should be installed with electronic leakage detection alarm device to prevent accidents.

Here mainly explains six points of precautions for the boiler, hoping to attract your attention. Before using the boiler, the surrounding environment should also be checked, the surrounding can not be placed flammable and explosive substances, to check the components of the equipment, a part of the aging, serious wear and tear should be replaced immediately.